Back to products

CDC I/O 6448


Cadac IO 6448

The CDC I/O 6448 is an 11U fixed configuration stagebox featuring 64 highly acclaimed Cadac mic-amps and 48 analogue XLR outputs. The stagebox is connected to the console using Cadac’s MegaCOMMS network protocol allowing the I/O unit to be located up to 150 meters from the mixer. The CDC I/O 6448 has dual MegaCOMMS send and receive ports on the rear for redundancy.

The Cadac mic-press can be controlled remotely from the console along with output assignments. To complete the user interface there is signal present, clip and phantom power indication plus mute indication for the outputs. Larger networks can be created by using the MegaCOMMS CDC MC Router which can connect up to 12 MegaCOMMS devices within one network.

For that extra peace of mind there is also the option for adding an additional power supply to safe guard against PSU failure.

Features Overview

Cadac MC IO 6448 front

  • 11U fixed configuration
  • 64 Cadac mic / line inputs
  • 48 line outputs
  • Dual pair of MegaCOMMS ports
  • Redundant power supply option


Cadac MegaCOMMS Group

Cadac’s MegaCOMMS digital audio network has been designed to meet the requirements of the most challenging applications. MegaCOMMS is a robust, TDM (time division multiplex) system. Control data is embedded within the data stream, so that no audio channels have to be sacrificed for this purpose. The high bandwidth available means that the current implementation of MegaCOMMS can carry 128 channels of 24-bit, 96 kHz audio, plus control data, plus clock, bi-directionally, up to 150 metres via a pair of RG-6 coaxial cables.

Consoles MegaCOMMS connectors

In addition to audio and control data, MegaCOMMS provides for accurate, phase-aligned clock distribution, by embedding timing markers in the data stream. This allows reliable, low-jitter synchronisation of all hardware elements within a network.

The simplest implementation of a MegaCOMMS network is the straightforward console-stagebox configuration. In this application, the console provides the clock and the stagebox synchronises itself once the connections are made. Total through-system propagation delay for this system, including all console processing and A-D / D-A conversions is an astonishing 37 samples (@ 96 kHz), or just under 400us. This compares with the many millisecond propagation delays usually found in most other similar systems.

For larger, true audio networks, a MegaCOMMS router is required which provides low-jitter clock synchronisation and flexible routing capability for up to 3072 channels of 24-bit, 96 kHz audio. The addition of a router into a system only adds an additional sample (approximately 10us) of propagation delay. MegaCOMMS is also capable of providing automatic fail-over to redundant spare connections, so providing peace-of-mind for critical applications. Most Cadac MegaCOMMS devices (consoles, large-format stageboxes and network bridges) support dual-redundant connections, with automatic seamless change-over in the event of cable failure.

Cadac CDC MC Router

The hardware “hub” for a large-scale network is the Cadac MegaCOMMS router – the CDC MC Router. This device has 12 pairs (send and return) of MegaCOMMS ports, easily identifiable from glowing colour coded BNC sockets. The MegaCOMMS router can connect up to 12 MegaCOMMS devices, and a MegaCOMMS device can be a console, stagebox or network bridge.

Cadac NetCOMMS front page

The CDC MC Router in conjunction with its control software, NetCOMMS, allows the fast and intuitive creation of powerful MegaCOMMS networks.  Via a PC via using a simple graphical user interface Router maps can be created, edited and saved before uploading to the CDC MC Router via the Ethernet connection or as part of a wireless network.

The CDC MC Router also has the useful function of providing “gain compensation” in that if any of the connected mic amps have their analogue gain adjusted, the router will automatically compensate for the change in audio level to any and all other devices connected. This gain compensation process takes just a single sample (about 10us.) for the router to make the necessary adjustment, and so is completely inaudible in operation. This facility allows a stagebox’s analogue inputs to be shared between a number of consoles, and for multiple consoles to be connected to a common set of I/O in order to provide multiple mixing systems or multiple fully dual-redundant systems. In these large scale applications, the MegaCOMMS router provides clock for all consoles and I/O devices.

Unit MegaCOMMS connectors

Cadac have also designed network bridging devices to enable MegaCOMMS to connect to other protocols. The network bridges feature dual-redundant power supplies and dual-redundant connections to other MegaCOMMS units, as well as asynchronous sample-rate conversion to other popular protocols such as MADI (AES10), via the CDC MC MADI Newtork Bridge, and DANTE via the CDC MC Dante Network Bridge.

MegaCOMMS networks are clocked at 96 kHz, but Cadac do provide for SRC (sample rate convertor) to other clock speeds and conversion to more widely adopted protocols such as MADI and Dante.

Example of MegaCOMMS Network



Cadac MC IO 6448 front


482.6mm wide (19”) x 482.9mm (19.25”) high x 282.9mm (11.14”) deep


13.5 kg / 29.76 lb

Image Gallery